Percy Dining Chair with Armrests, Terracotta Fabric, Walnut
4.8/5 Excellent 9500+ Reviews
You Save 30% (€60)
As seen:
Pay in 30 days with
Free shipping & exchange
14-Day Returns; 2-Year Warranty
Curved Walnut Dining Armchair, Anthracite Fabric, Wraparound Back
The Percy is a dining armchair with a wraparound back and a warm walnut-tone frame. It gives you the look of a solid walnut dining chair on a welded steel frame, at a price that sits well below the same chair in real wood. Anthracite upholstery, generous proportions, the kind of chair that earns its place at the head of the table.
What you see in the photo: a curved back that wraps around the body, upholstered in deep anthracite fabric, set on a slim walnut-finished frame with armrests that flow into the seat line. The walnut finish carries the warmth and depth of real wood grain, paired with a matte anthracite weave.
Trusted by thousands of homes. Rated excellent on Trustpilot.
Comfort for the Long Sit
The wraparound back is the reason this chair is comfortable for a three-hour dinner. It supports the lower back without forcing an upright posture. The seat sits at 48 cm from the floor, the standard European dining chair height, so your feet rest flat with your knees at right angles. The armrests are part of the back curve, so leaning sideways or resting an elbow feels natural.
The Walnut Look, Without the Walnut Price
If you are shopping for solid walnut dining chairs, you already know the price tag. The Percy gives you the same warm walnut tone, the same mid-century weight, the same wood-grain depth, on a welded steel frame finished in a powder-coated walnut wood-look. It costs a fraction of what an equivalent solid walnut chair costs, and it solves the problems real wood has at the dining table. The frame will not loosen at the joints over years of being pulled in and out. It does not need oiling or refinishing. Water marks, hot plates, and the occasional dropped fork do not leave dents or stains on the finish. Wipe it down with a damp cloth and it looks the way it did the day it arrived. For buyers who love the walnut look but want a chair that is fairly priced and easier to live with, this is the honest middle ground.
Fabric That Survives a Family Table
The anthracite upholstery is a textured woven fabric, soft to the touch but built for daily use. Rated to 50,000 Martindale, the durability standard used in commercial hospitality, with stain treatment built in rather than sprayed on. Wine, oil, sauce, and coffee blot off with a damp cloth before they set. In real terms: anthracite is the most forgiving colour in the range. It hides crumbs, the odd splash, and the dust that lands on every dining chair between cleans.
How It Pairs With Your Table
The seat is 48 cm from the floor, which suits dining tables from 73 to 76 cm high. The armrests sit at 76 cm, so the chair will not slide fully under tables with an apron lower than that height. Measure the underside of your table apron before ordering. If the armrest fit is tight, browse the full dining chair collection for armless options, or see dining chair sets for matched pairs and fours.
Built to Stay Tight
Welded steel frame with a powder-coated walnut wood-look finish. Knock-down assembly with reinforced corner blocks where the legs meet the seat. Rated to 120 kg. Floor protectors fitted to all four feet so it slides on tile, wood, and stone without scratching. The whole chair weighs 10 kg, heavy enough to feel solid when you pull it back from the table, light enough to lift cleanly when you rearrange.
Where the Percy Lives
The Percy reads warm modern. The walnut tone gives it a mid-century anchor; the curved back keeps it from feeling formal. It pairs naturally with walnut and oak dining tables, with travertine and stone tops, and with darker timbers where you want the back curve to soften the room. Anthracite fabric works against white, grey, sand, and warm-neutral walls, and against curtains in cream, taupe, or rust.
For Hospitality and Trade
Specified by interior designers and operators across Europe for hotel restaurants, private dining rooms, members' clubs, and design-led residential projects. Built to commercial-grade durability standards (50,000 Martindale fabric, stain-treated, powder-coated steel frame, 120 kg capacity). Volume pricing, fabric samples on request, and flexible B2B payment options are available through our Trade Programme.
Highlights
- The walnut look on a welded steel frame, at a fraction of solid walnut chair pricing
- Curved wraparound back with integrated armrests, comfortable for long dinners
- 50,000 Martindale anthracite fabric, stain-treated for wine, oil, and sauce
- 48 cm seat height fits standard 73 to 76 cm tables; 76 cm armrest height (measure your apron)
- 120 kg capacity, floor protectors fitted, 2-year warranty
| Width | 58 cm |
|---|---|
| Height | 76 cm |
| Depth | 57 cm |
| Seat Height | 48 cm |
| Seat Width | 58 cm |
| Seat Depth | 57 cm |
| Arm Height: | 76 cm |
| Carry Capacity | 120 kg |
| Product Type | Dining Chair |
|---|---|
| Colour | Terracotta |
| Leg Colour | Walnut |
| Material | Fabric |
| Material Seat | Fabric |
| Material Frame | Metal |
| Material Backrest | Fabric |
| Assembly | Assembly Required |
| Warranty | 2 years |
9500+ TRUSTPILOT REVIEWS




























